Takeoff Flow display - UV glue protection

At Manta Foils, we continuously seek to improve our products and ensure the best long-term experience for our riders. After testing, we found that adding a small extra layer of UV glue to the display provides additional protection. To keep your Flow unit in perfect condition, we’re sharing a simple preventive maintenance you can perform yourself. This quick fix helps prevent possible water ingress and keeps your equipment reliable during your sessions.

ITEMS REQUIRED:

• UV GLUE (HARD TYPE) with UV Light
• Wipes for cleaning

To Shop (EU): https://amzn.eu/d/4tGJXUj
To Shop (USA): https://a.co/d/fIJNSOF
To Shop (AU): https://amzn.asia/d/dISihpj


Step nº1: Clean the display glass before applying glue, then dry.













 Step nº2: Place your FLOW unit on a flat surface and add UV Glue evenly, without any air bubbles. Needs to be filled until the surface area.
   




Step nº3 After filling the glue, keep it under UV Light for 5 min, then check if the curation is successful.

  

After curating, your display should now look like this:

• Related Articles

• Battery Level Not Showing on Remote Display

  Issue: The battery level of your Manta Foils unit may not appear on the remote display. This is often due to the power settings configuration, which needs to be set to Takeoff. Solution Update Firmware Ensure both the main unit and the remote are ...

• KB - KB000004 - How to assemble the TakeOff Flow - Tutorial

  How to assemble the TakeOff Flow - Tutorial How to assemble the TakeOff Flow - Tutorial

• TakeOff Chargers Compatibility Notice

  ⚠ WARNING: TakeOff Air / Flow charger must never be used with Evo batteries, as this may also result in irreversible damage. Visual Identification – Connector Detail Although the physical connector looks identical, the internal wiring is different ...

• Battery Reading Mismatch Between Main Unit and Remote or Remote not showing battery

  Sometimes the battery readings may differ between the main unit and the remote, or the remote may not show the battery level of the Air Unit. Please follow the steps below to resolve the issue: 1. Update Firmware Ensure both the Main Unit and the ...

• KB - KB000001 - Update Firmware on TakeOff main unit & remote

  Update Firmware on TakeOff main unit & remote Keeping your main unit and remote firmware up-to-date ensures optimal performance, compatibility, and access to the latest features. This guide will walk you through the process step by step. Before we ...