Battery Reading Mismatch Between Main Unit and Remote or Remote not showing battery

Battery Reading Mismatch Between Main Unit and Remote or Remote not showing battery

Sometimes the battery readings may differ between the main unit and the remote, or the remote may not show the battery level of the Air Unit. Please follow the steps below to resolve the issue:

1. Update Firmware

Ensure both the Main Unit and the Remote are running the latest firmware.

Follow this update tutorial (until min 2:45):

2. Adjust Power Settings on the Remote

Make sure the main unit is connected to the remote, then:

Open the Remote Menu > Power Settings> Device Selection >Choose Takeoff or Takeoff EVO (depending on your unit) > Press Return

After completing these steps, the battery readings should display correctly.

If the issue persists, feel free to reach out to support for further assistance.

    • Related Articles

    • Battery Level Not Showing on Remote Display

      Issue: The battery level of your Manta Foils unit may not appear on the remote display. This is often due to the power settings configuration, which needs to be set to Takeoff. Solution Update Firmware Ensure both the main unit and the remote are ...

    • Why does the EVO remote show a lower battery level than actual?

      You may notice that the battery level displayed on the EVO remote appears lower before triggering the motor, and then updates to a higher (more accurate) value once the trigger is engaged. This is normal behavior and not a fault. The discrepancy is ...

    • Battery level discrepancy between Main unit and remote

      Issue: The battery level of your Manta Foils unit may not appear on the remote display, or it may show different levels. This is often due to the power settings configuration, which needs to be set to Takeoff. Solution Update Firmware Ensure both the ...

    • KB - KB000001 - Update Firmware on TakeOff main unit & remote

      Update Firmware on TakeOff main unit & remote Keeping your main unit and remote firmware up-to-date ensures optimal performance, compatibility, and access to the latest features. This guide will walk you through the process step by step. Before we ...

    • Updating Firmware and ESC config; Mandatory for all users upgrading to EVO Performance motor!

      IMPORTANT: Please go through this update & configuration process to install your TakeOff Performance Motor. We streamlined the smartphone application and the remote interface in order to get this done in 5min. Wishing you awesome rides with your new ...