Battery Level Not Showing on Remote Display

Battery Level Not Showing on Remote Display

Issue: The battery level of your Manta Foils unit may not appear on the remote display. This is often due to the power settings configuration, which needs to be set to Takeoff.

Solution

Update Firmware
Ensure both the main unit and the remote are running the latest firmware version.  Check on software: firmware article for detailed steps

Then:

Check Antennas and Power Settings > Power on both the remote and the main unit > Verify that both antennas are black (indicating proper connection).

On the remote, go to:
Menu → Power Settings → Device Selection

Select Takeoff (usually the first option in the list) > Return > Restart both the main unit and the remote to apply the new settings.

After these steps, the battery level should display correctly on your remote.

    • Related Articles

    • Battery Reading Mismatch Between Main Unit and Remote or Remote not showing battery

      Sometimes the battery readings may differ between the main unit and the remote, or the remote may not show the battery level of the Air Unit. Please follow the steps below to resolve the issue: 1. Update Firmware Ensure both the Main Unit and the ...

    • Why does the EVO remote show a lower battery level than actual?

      You may notice that the battery level displayed on the EVO remote appears lower before triggering the motor, and then updates to a higher (more accurate) value once the trigger is engaged. This is normal behavior and not a fault. The discrepancy is ...

    • Battery level discrepancy between Main unit and remote

      Issue: The battery level of your Manta Foils unit may not appear on the remote display, or it may show different levels. This is often due to the power settings configuration, which needs to be set to Takeoff. Solution Update Firmware Ensure both the ...

    • KB - KB000001 - Update Firmware on TakeOff main unit & remote

      Update Firmware on TakeOff main unit & remote Keeping your main unit and remote firmware up-to-date ensures optimal performance, compatibility, and access to the latest features. This guide will walk you through the process step by step. Before we ...

    • Takeoff Flow display - UV glue protection

      At Manta Foils, we continuously seek to improve our products and ensure the best long-term experience for our riders. After testing, we found that adding a small extra layer of UV glue to the display provides additional protection. To keep your Flow ...