EVO Unit Not Starting / Motor “Blips” on First Use (ESC Configuration Fix)

• Related Articles

• Updating Firmware and ESC config; Mandatory for all users upgrading to EVO Performance motor!

  IMPORTANT: Please go through this update & configuration process to install your TakeOff Performance Motor. We streamlined the smartphone application and the remote interface in order to get this done in 5min. Wishing you awesome rides with your new ...

• EVO Performance Motor - Extra reinforcement with loctite

  At Manta Foils, we continuously work to refine our products and improve long-term reliability in real-world riding conditions. After extensive testing, we found that applying a small amount of Loctite to the central screw on the Performance Motor ...

• Why does the EVO remote show a lower battery level than actual?

  You may notice that the battery level displayed on the EVO remote appears lower before triggering the motor, and then updates to a higher (more accurate) value once the trigger is engaged. This is normal behavior and not a fault. The discrepancy is ...

• Battery Reading Mismatch Between Main Unit and Remote or Remote not showing battery

  Sometimes the battery readings may differ between the main unit and the remote, or the remote may not show the battery level of the Air Unit. Please follow the steps below to resolve the issue: 1. Update Firmware Ensure both the Main Unit and the ...

• Battery level discrepancy between Main unit and remote

  Issue: The battery level of your Manta Foils unit may not appear on the remote display, or it may show different levels. This is often due to the power settings configuration, which needs to be set to Takeoff. Solution Update Firmware Ensure both the ...